Samsung Galaxy A04 ISP PinOUT

What is Samsung Galaxy A04 A045F ISP Footmap?

ISP means “programming in the system.” Programming in the system (ISP) allows communication with the target chip without removing it.

The main advantage of this method is the ability to communicate with the eMMC target chip or eMCP, bypassing the CPU.

It offers higher data mining speed than JTAG, but it requires excellent welding skills. ISP for forensics is a connection method connected to an eMMC or eMCP flash memory chip designed to download the entire memory contents of the device.

Samsung Galaxy A04 A045F/M ISP PinOUT, test point to Remove Pattern Lock, FRP, And Flashing, Dead Boot Repair

Samsung Galaxy A04 is a budget-friendly device. It has a 6.5-inch HD+ screen, Media Tek Helio P35 processor, and 3GB of RAM.

It also has three cameras on the back, including a 13-megapixel main camera, a 2-megapixel depth sensor, and a 5-megapixel ultra-wide-angle camera. It is powered by a 5,000mAh battery and runs the Android 10 operating system with Samsung’s One UI user interface.

In this tutorial, we will guide you to show you the test image of Samsung Galaxy A04 ISP battery.

Use UFI box to remove model lock, screen lock, finger lock on Samsung Galaxy A04A045F/M, if you are a technician who is new out of school or a technician with Android related software experience, if the USB error is not recognized as occurring, your USB does not work.

If the battery is not charged, your USB socket will not work and you will fail in this method. If you have any questions, please write your questions in the comment box and I will try to help you.

You can easily get the Samsung Galaxy A04 A045F ISP Pinout connection of the Samsung Galaxy A04 by following the full guide below along with images.

By using the ISP Pinout, you can bypass FRP lock or reset user data on your device via EasyJTAG Plus Box, or any other tool. Check out the below guide.

Samsung Galaxy A04 A045F ISP EMMC Pinout Image:

Hardware Process:

1. You need to remove the back cover from your phone. Next, remove the motherboard from the existing battery, fingerprint sensor, and camera.
2. Remove the screws from the motherboard, remove and place in a safe place.
3. On the motherboard, position the six-legged eMMC. The feet are Dat 0, CLK, CMD, GND, VCC, and VCCQ. You need to go through the steel shell to expose them.
4. Carrying the UFI case, remove the converter from the box. You will see that the legs in the converter I mentioned in the previous step are the same.
5. Four leg soldering: Dat0, CLK, CMD and GND, with a jump button between the motherboard and the modulator. Leave VCC and VCCQ to USB to turn them off.
6. Place the converter in the UFI box. Connect the box to the computer.
7. Connect the motherboard to your phone’s battery. Then, place the USB cable on your phone and connect it to your computer.

Read more: Samsung Galaxy A31 Network Ways

Samsung Galaxy A04 A045F repair dead boot or any brand phone you need two dongles best in the market one is easy jtag plus and another is ufi box both are best in the market. those boxes help some phones after flashing the wrong firmware not show booting on-screen.

this you need those boxes for boot repair. some brands, not possible lock remove like a pin, pattern, password, FRP, and MDM lock this really supports for remove locks.