By using PINOUT ISP for Samsung Galaxy A13 A136U EMMC, you can easily restore original ROM, skip FRP key, remove MDM password lost mode (device locked, no download mode, no recovery) and remove with EasyJet or UFI box FRP plug-in. In this tutorial, we will show you the test and operation images of UFS footprints and test points for Samsung Galaxy A13 A136U.
Remove model key, screen lock, finger lock on Samsung Galaxy A136U with UFI box, if you are a new tech out of school or a tech with experience with Android related software, your USB can’t afford it if the bug doesn’t accept it effect. If the battery isn’t charged, your USB socket won’t work properly and you will fail in this method. If you have any questions, please write your questions in the comment box, I will try my best to help you.
You can easily get the ISP Footprint Connection for Samsung Galaxy A13 A136U by following the full instruction below along with the images. With ISP Pinout, you can skip FRP keys, or reset user data on the device via EasyJTAG boxing or any other tool. Check the instructions below.
What is Samsung Galaxy A13 A136U ISP Footprint?
ISP stands for “In-System Programming”. In-system programming (ISP) allows communication with the target chip without removing it. The main advantage of this method is the ability to communicate with an eMMC target chip or eMCP, thereby bypassing the CPU. It offers higher data mining speed than JTAG, but it requires excellent soldering skills. For forensic use, ISP is the connection method to an eMMC or eMCP flash chip designed to download the entire memory content of the device.
Read more: Download Samsung Galaxy A53 5G Schematic
Samsung Galaxy A13 A136U ISP EMMC Footprint Image:
Hardware process:
You need to remove the back cover from the phone. Next, remove the motherboard from the existing battery, fingerprint sensor, and camera.
Remove the screws from the motherboard, remove and place in a safe place.
On the motherboard, locate the six-legged eMMC. The pins are Dat 0, CLK, CMD, GND, VCC and VCCQ. You need to go through the steel shell to expose them.
Take the UFI case and remove the converter from the box. You’ll see that the legs are the same in the converter I mentioned in the previous step.
Four legs are soldered: Dat0, CLK, CMD and GND, there is a jump button between the main board and the tuner. Leave VCC and VCCQ to USB to turn them off.
Put the converter in the UFI box. Connect the box to the computer.
Connect the motherboard to the phone’s battery. Then, put the USB cable on your phone and connect it to your computer.
Follow me:
