What is Samsung Galaxy A53 A536E UFS ISP Footmap?
ISP means “programming in the system.” Programming in the system (ISP) allows communication with the target chip without removing it. The main advantage of this method is the ability to communicate with the UFS target chip, bypassing the CPU. It offers higher data mining speed than JTAG, but it requires excellent welding skills. ISP for forensics, which is a connection method connected to a UFS flash memory chip or eMCP designed to download the entire memory contents of the device.
Samsung Galaxy A53 A536E UFS footmap | checkpoint
Have you tried to flash or remove FRP lock on Samsung Galaxy A53 A536E phone, but haven’t found an effective solution yet? If so, it means that you need to use the Samsung Galaxy A53 5G UFS ISP battery, so your tool shows errors during stock base program flash, key removal, and FRP process.
With this foot scenario, you can perform UFS chip programming flashing remove user key Samsung Galaxy A53 5G reset FRP, record UFS output, remove MDM key. Here you will directly connect to the Samsung Galaxy A53 5G A536E UFS ISP battery and its way,
You can easily get the UFS ISP Pinout connection of the Samsung Galaxy A53 A536E by following the full guide below along with images. By using the ISP Pinout, you can easily bypass FRP lock or reset user data on your device via EasyJTAG Plus Box, or any other tool. Check out the below guide.
Footmap picture of Samsung Galaxy A53 A536E UFS ISP
1: You need to remove the back cover from your phone. Next, remove the motherboard from the existing battery, fingerprint sensor, and camera.
2: Remove the screws from the motherboard, remove and place in a safe place.
3: On the motherboard, position the six-legged eMMC. The legs are Thorpe, Tessen, RxOp, Rxon. You need to go through the steel shell to expose them.
4: Carry the UFI box and remove the converter from the box. You will see that the legs in the converter I mentioned in the previous step are the same.
5: Soldering 4 legs: TxOp, TxOn, RxOp, RxOn jumps between motherboard and controller. Leave VCC and VCCQ to USB to turn them off.
6: Place the converter inside the UFI container. Connect the box to the computer.
7: Connect the motherboard to your phone’s battery. Then, place the USB cable on your phone and connect it to your computer.
Samsung Galaxy A53 5G+ Repair Dead boot, Flashing, remove FRP lock or any brand phone you need EasyJTAG Plus it is the only box in the market that supports the UFS chip. those boxes help some phones after flashing the wrong firmware not show booting on-screen. this you need those boxes for boot repair. some brands, not possible lock remove like a pin, pattern, password, FRP, and MDM lock this really supports for remove locks.

Required:
- Samsung Galaxy A53 A536Ewith Good Charge Battery
- Easy Jtag box with adapter
- Micro USB Cable
- Computer or Laptop
Lock FRP Samsung Galaxy A53 A536E equals easyJet TAG plus:
Remove the back of the device and connect the cord to the UFS ISP battery.
Next, connect the correct UFS ISP battery to the ijettagga box
Check the UFS tab
Then click on “Identify UFS chip.”
Connect the Samsung Galaxy Note 10+ to your PC via a USB cable.
Go to Presets and select Percy Sent
Now, click Delete LUN0 Data
Finish.
Read more: Download Samsung Galaxy A53 5G Schematic