Here you will get the direct connection of Samsung Galaxy S22 Ultra ISP Pinout and its Ways, by using this pinout you can do UFS chip Programming Flashing remove Samsung Galaxy S22 Ultra user lock FRP reset, write UFS dump.
You can easily get the UFS ISP Pinout connection of the Samsung Galaxy S22 Ultra SM-S908 by following the full guide below along with images. By using the ISP Pinout, you can easily bypass FRP lock or reset user data on your device via EasyJTAG Plus Box, or any other tool. Check out the below guide.
Samsung Galaxy S22 Ultra Specification:
The device features a 6.8 inches Dynamic AMOLED 2X display that has a 1440 x 3200 pixels resolution. The device comes in Black and others. The smartphone is integrated with a Single SIM (Nano-SIM and/or eSIM) or Dual SIM (Nano-SIM and/or eSIM, dual stand-by).
Samsung Galaxy S22 Ultra 5G is packed with 8 GB and 12 GB RAM with 128 GB, 256 GB, 512 GB, and 1 TB internal storage. It is fueled with a non-removable Li-Po 5000 mAh battery + Fast charging 45W + USB Power Delivery 3.0 + Fast Qi/PMA wireless charging 15W + Reverse wireless charging 4.5W.
The rear camera of the smartphone consists of a quad camera, which consists of 108 MP (wide) + 10 MP (telephoto) + 10 MP (telephoto) + 12 MP (ultrawide) while on the front there is a 40 MP camera. The device runs on the Android 12 + One UI 4.1
What is Samsung Galaxy S22 Ultra ISP Pinout?
Samsung Galaxy S22 Ultra SM-S908 ISP means “In-System Programming”.In-System Programming (ISP) allows communication to take place with a target chip without the need to remove it. The main advantage of this method is the possibility to communicate with a target chip UFS bypassing the CPU. It brings higher speed for data extraction compared with JTAG but it requires great soldering skills. ISP applied to forensics, is the practice of connecting to a UFS or eMCP flash memory chip for the purpose of downloading a device’s complete memory contents.
Samsung Galaxy S22 Ultra Repair Dead boot, Flashing, remove FRP lock or any brand phone you need EasyJTAG Plus it is the only one box in the market which supports the UFS chip. those boxes help some phone after flashing wrong firmware not show booting on-screen.this you need those boxes for boot repair. some brands, not possible lock remove like a pin, pattern, password, FRP, and MDM lock this really supports for remove locks.
Samsung Galaxy S22 Ultra ISP Pinout Image
1: You need to take the rear case away from your phone. Next, unplug the motherboard from the existing battery, fingerprint sensor, and camera.
2: Unscrew the screws from the motherboard and take it out and put it in a safe place.
3: On your motherboard, locate the six eMMC pins. The pins are TxOp, TxOn, RxOp, RxOn. You will require to cut through the steel cover to reveal them.
4: Bring the UFI box and take the adapter out from it. You will see the exact same pins in the adapter I have mentioned in the previous step.
5: Solder the 4 pins: TxOp, TxOn, RxOp, RxOn with jumpers between the motherboard and the adapter. Left the VCC and VCCQ for the USB to power them out.
6: Put the adapter inside the UFI box. Connect the box to the computer.
7: Connect the motherboard to the phone’s battery. Then, put the USB cable on the phone and connect it to the computer.
- Samsung Galaxy S22 Ultra with Good Charge Battery
- Easy Jtag box with adapter
- Micro USB Cable
- Computer or Laptop
Read more: Samsung Galaxy A02s A025G SP EMMC PinOUT | Test Point
Samsung Galaxy S22 Ultra FRP Lock Using EasyJTAG Plus:
- Remove the back panel of the device and connect the wire to the UFS ISP Pinout.
- Next, connect the correct UFS ISP Pinout to the EasyJTAG Plus box
- Check the “UFS” tab
- Then Click on “Identify UFS Chip.
- Connect your Samsung Galaxy S22 Ultra to the PC via a USB cable.
- Go to Preset Select Persistent
- Now Click on Erase LUN0 Data
Follow me: Youtube.com